PPA5xx/15xx communications manual
2-57
Waits for data to be available (if required)
then returns selected results.
Either a single string or multiple string
replies can be selected.
number: The required number of data
string replies
A single reply string containing up to 64
data values as selected by the MULTIL
command.
Multiple reply strings each containing the
same number of data values (maximum
of 64) as selected by the MULTIL
command.
MULTIL,0
MULTIL,1,1,2 (phase 1 Watts)
MULTIL,2,2,2 (phase 2 watts)
MULTIL,3,4,3 (sum VA)
MULTIL?
In the above example a single string reply
containing 3 data values is returned.
MULTIL,10?
In the above example 10 data strings are
returned, each string containing 3 data
values.
For further information and assistance with the Multilog
application please go to page 2-95 where you will find an
application guide to assist with this function.
To Next Page
Loading...
