Nexo GEO S12 Series System Manual

TECHNICAL SPECIFICATIONS
Page 66 / 95 System Manual GEOS12 LS18
8.2 GEO S1210
8.2.1 System specifications
GEO S1210 (without CDD
TM
)
GEO S1210 (with CDD
TM
)
GEO S1210 WITH NEXO TDCONTROLLER SETUP
Frequency Response @-6 dB
50 Hz to 20 kHz
Sensitivity 1W@1m
103 dB SPL Nominal
Peak SPL@1m
131 to 133 dB
Vertical Dispersion
10°
Horizontal Dispersion
80°
120°
Passive Crossover Frequency
1.1 kHz
Nominal Impedance
Active mode : (16 Ω LF + 16 Ω HF) / Passive mode : 16 Ω
Recommended Power
Active mode: (1100 Watts LF + 650 Watts HF) / Passive mode: 1100 Watts
PRODUCT FEATURES
LF Component
1 x 12” (30cm) high excursion neodymium 16 Ohm driver with PDD
TM
HF Component
1 x 3” voice coil, 1.4” throat 16 Ohms driver on a HR Wavesource
TM
Height x Width x Depth
344 mm x 674 mm x 378 mm (13.5” x 26.5” x 14.9”)
Weight: Net
28 kg (61.8 lb)
Connectors
2 x NL4, 4 poles connectors (1+/1- Through / 2+/2- GEOS12 in passive mode,
1+/1- LF, 2+/2- HF in active mode)
Construction
Baltic Birch Plywood with structured black coating
Fittings
2 x Side handles
Front Finish
Molded dark grey metal grill
Operating temperature range
0°C - 40 °C (32° F - 104° F)
Storage temperature range
-20 °C - 60 °C (-4 ° F - 140° F)
SYSTEM OPERATION
Recommended powering solution
NXAMP4x4mk2 Powered TD controller: up to 4 x GEOS12 in passive mode per
channel
Optional powering solution
NXAMP4x2mk2 Powered TD controller: 1 x GEOS12 in passive mode per
channel
NXAMP4x1mk2 Powered TD controller (Bridged): up to 3 x GEOS12 in passive
mode per channel

Nexo GEO S12 Series Specifications

General

Brand	Nexo
Model	GEO S12 Series
Category	Speaker System
Language	English