Nexo GEO S12 Series System Manual

GEO S12 HARDWARE SETUP PROCEDURE
System Manual GEOS12 LS18 Page 51 / 95
6.4.8 LS18 and three or more GEO S12 flown vertically
Required items
- 1 x Bumper (GPT-BUMPER)
- M x pairs of LS rigging plates (LST-XBOW) for M x LS18 cabinets
- N x Pair of Rigging Plates (GPT-XBOW) for N GEO S12 cabinets
- 4 x (N+M) Quick release pins (VXT-BL820) for (N+M) cabinets
- 1 hoist (not provided)
IMPORTANT
Maximum GEO S12 quantity for flown vertical cluster is 12 (and eventually less).
Maximum LS18 quantity for flown vertical cluster is 6 (and eventually less)
Please check NS-1 for mechanical Safety Working Load computations.
IMPORTANT
Please check configuration in NS-1 for proper motor hoist rating
Procedure
- Insert LST-XBOW into connecting plates of both sides of LS18s
LS18 XBOW ANGLE SETTINGS PLATE

Nexo GEO S12 Series Specifications

General

Brand	Nexo
Model	GEO S12 Series
Category	Speaker System
Language	English