Nexo PSR2 Series User Manual

PS AND LS GENERAL SET-UP INSTRUCTIONS
Page 10 / 109 System Manual PSR2 Series
IMPORTANT
Long speaker cables induce capacitive effects – up to hundreds of pF depending on the quality of the
cable - with a low-pass effect on high frequencies. If long speaker cables must be used, ensure that they
do not remain coiled while in use.
2.3 PS and LS recommended amplification
NEXO TD Controllers
Recommended amplification
DTD Controller + DTDAMP4x0.7 (4x0.7kW/4)
2 x PS8 per channel
DTD Controller + DTDAMP4x1.3 (4x1.3kW/4)
2 x PS8 per channel
1 x LS400 per channel
1 x PS10R2 per channel
DTD Controller + DTDAMP4x1.3 Bridge Stereo (2x2.6kW/8)
1 x LS600 per bridged channels
1 x PS15R2 in passive mode per bridged channels
1 x LS18 per bridged channels
NXAMP4x1mk2 Powered Controller 4 channels mode (4x1.3kW/2)
3 x PS8 per channel
2 x LS400 per channel
NXAMP4x1mk2 Powered Controller Bridged Stereo mode (2x2.6kW/4)
2 x PS10R2 per bridged channels
2 x LS600 per bridged channels
2 x PS15R2 in passive mode per bridged channels
2 x LS18 per bridged channels
NXAMP4x2mk2 Powered Controller 4 channels mode (4x2.5kW/2)
4 x PS8 per channel
3 x LS400 per channel
3 x PS10R2 per channel
2 x LS600 per channel
2 x PS15R2 in passive mode per channel
2 x PS15R2 in active mode: 2 channels
1 x LS18 per channel
NXAMP4x4mk2 Powered Controller 4 channels mode (4x4.5kW/2)
4 x PS8 per channel
3 x LS400 per channel
4 x PS10R2 per channel
4 x LS600 per channel
4 x PS15R2 in passive mode per channel
4 x PS15R2 in active mode: 2 channels
3 x LS18 per channel
2.4 PS and LS setups on NEXO TD Controllers
Please consult nexo-sa.com for NEXO TD Controllers firmware information.

Nexo PSR2 Series Specifications

General

Brand	Nexo
Model	PSR2 Series
Category	Speaker System
Language	English