PS SERIES HARDWARE SETUP PROCEDURE
Page 60 / 109 System Manual PSR2 Series
6.5 Testing and Maintenance of the system
General: PS Series accessories are precision piece of equipment and require regular attention to maintenance in order to give
long and reliable service. NEXO recommends regular testing of loudspeaker rigging components, preferably using a suitable
test rig coupled with a visual inspection.
Fasteners: there are several critical points in the PS and LS cabinets.
Of primary concern are:
a) The grid screws attaching the grid to the cabinet
b) The machine screws attaching the connecting plates to the cabinet.
These fasteners should be regularly checked and tightened as necessary.
Cleaning: The exterior of the cabinet and the rigging system can be cleaned with a damp cloth soaked in mild soapy water. On
no account use solvent based cleaners, which may damage the finish of the cabinet
After cleaning, the rigging system must be treated with a suitable lubricant to prevent rusting. NEXO recommends the use of
Scottoil FS365 which is a water-based lubricant with a mixture of machine oil, surfactant and anti-rust treatment.
.
To Next Page
Loading...
Need help?
General
