Nexo PSR2 Series User Manual

TECHNICAL SPECIFICATIONS
Page 72 / 109 System Manual PSR2 Series
8.5 PS10R2
8.5.1 System specifications
PS10R2 WITH NEXO TDCONTROLLER SETUP
Frequency Response @-6 dB
58 Hz to 20 kHz
Sensitivity 1W@1m
99 dB SPL Nominal
Peak SPL@1m
129 to 132 dB
HF Dispersion
50° to 100° Horizontal – 55° Vertical Rotatable Horn
Passive Crossover Frequency
2 kHz
Nominal Impedance
8 Ω
Recommended Power
1200 Watts
PRODUCT FEATURES
LF Component
1 x 10”x2.5" shielded Neodymium 8 Ohms driver
HF Component
1x 1" throat, 1.7" PI diaphragm/ Neodymium driver on a low distortion constant
directivity asymmetrical dispersion horn
Height x Width x Depth
515 mm x 316 mm x 277 mm (20.28” x 12.44” x 10.91”)
Weight: Net
14 kg (31 lb)
Connectors
2 x NL4, 4 poles connectors (1+/1- Through / 2+/2- PS10R2)
Construction
Baltic Birch Plywood & structured black coating
Fittings
2 x Metal recessed handles
Front Finish
Molded dark grey metal grill
Operating temperature range
0°C - 40 °C (32° F - 104° F)
Storage temperature range
-20 °C - 60 °C (-4 ° F - 140° F)
SYSTEM OPERATION
Recommended powering solution
NXAMP4x2mk2 Powered TD controller: 3 x PS10R2 per channel
Optional powering solution
NXAMP4x4mk2 Powered TD controller: 4 x PS10R2 per channel
NXAMP4x1mk2 Powered TD controller (Bridged): 2 x PS10R2 per channel
DTD Controller + DTDAMP4x1.3: 1 x PS10R2 per channel

Nexo PSR2 Series Specifications

General

Brand	Nexo
Model	PSR2 Series
Category	Speaker System
Language	English