11
8. Using Personal Computer
8.1. Connecting Wirelessly to PC
Switch-on the WIFI Drive by pressing the power but-
ton at the front panel. Wait for few minutes until the
Wireless LED remain lit. Enable the Wi-Fi feature on
your PC and open the Wireless Network Connection.
Select the NEXTAV-XXXX wireless connection (default
wireless SSID: NEXTAV-XXXX) and enter the default
password as 11111111. Once you have successfully
connected to your WIFI Drive, you may now run the
“NEXTAV WIFI Drive” to search for your device and
complete the configuration process.
8.2. PC Client Login Utility
Double-click the “NEXTAV WIFI Drive” icon on your
desktop. The software utility will search all the
connected devices in your network as seen on the
screenshot below.
If you do not find the WiFiDisk on the list of devices
connected in your network, click on the “Refresh”
button to refresh the device list.
Select the WiFiDisk on the list, then click on the “Log
In” button to enter the web interface as seen on the
image.
To Next Page
Loading...
General