55
Click on the “Save” button after making any changes.
Click on the “X” to exit and cancel.
11.7.2. Wi-Fi & LAN
The settings inside
the Wi-Fi & LAN
can be modified
based on your
needs. See the
screenshot below
for the available options.
1. SSID: Enter the combination of letters and num-
bers only. 32 characters is the maximum allowable
SSID length
2. Channel: The default setting is set to Auto. There
are 14 available channels to choose from.
3. Modes: The default setting is 11b/g/n. You can
also manually set the modes to 11Mbps (802.11b),
54MBPS (802.11G), and 150Mbps (802.11n).
4. Security: The default setting is Mixed WPA/WPA2-
PSK. WPA-PSK and WPA2-PSK are also available.
5. Password: The default password is set to
11111111.
6. IP Address: The default IP address is set to
10.10.10.254 with subnet mask of 255.255.255.0.
The IP address can be changed.
Click on the “Save” button after making any changes.
Click on the “X” to exit and cancel.
To Next Page
Loading...
General