20
9.5. Wirelessly connecting your Android devices
1. Turn-on the WIFI Drive. Wait for few minutes to
complete the initialization process. The blue Wi-Fi
LED on the device should remain solid indicating that
the initialization process has been completed.
2. Click on the “Settings” icon on your desktop as
seen on the screenshot below.
3. Switch the Wi-Fi to ON position. Inside the Wi-Fi
networks, the “NEXTAV-XXXX” should appear on the
list. Click on the “NEXTAV-XXXX” as seen on the im-
age below. The “XXXX” part of the SSID is the last
To Next Page
Loading...
General