56
11.7.3. DHCP Server
The DHCP or Dynamic Host Conguration Protocol is
a network protocol that enables a server to automati-
cally assign an IP address to a computer connected
into a network. By default, the DHCP Server option is
enabled. This option can be disabled if needed and
the IP address can be manually assigned.
Click on the “Save” button after making any changes.
Click on the “X” to exit and cancel. Click on the
“DHCP List” button and it will provide a list of all
the computers
and devices
connected to
your WIFI Drive
Device. Please
see the screen-
shot below.
11.7.4. Internet Settings
There are two available Internet Access options –
A. Wireless Access. Connecting the WIFI Drive to
another wireless device to have the internet access.
B. Wired Access. Directly connecting the WIFI Drive to
the available port on the back the router.
To Next Page
Loading...
General