12
Type the default User Name as admin and leave the
User Password as blank. Click on the “Log In” button
to access the Web Management Interface.
If you choose to click on the “My Storage” button,
enter the admin login name and password to gain ac-
cess to the WIFI Drive. Once successfully logged-in,
it automatically mount the storage area of the WIFI
Drive onto your desktop
8.3. WIFI Drive Configuration using PC
Once your Wi-Fi enabled-PC is successfully connect
to the WIFI Drive, using the “NEXTAV WIFI Drive” will
allow you to access our built-in Web Management
Interface and configure your device.
1. During the initial setup, our Wizard will automati-
cally run and will guide you through the step-by-step
process on configuring the WIFI Drive as seen on
the screenshot below. You may cancel this process
by clicking on the “X” at the top right corner of the
window. If you cancel the Wizard, it will keep the fac-
tory default settings of your WIFI Drive.
2. Click on the “Next” button. By default, the Wired
Access is selected.