2. Channel Setup
FromhereyoucanadjustFavourite Setup settings or channel search concerning your TV.
After automatic channel scan, you can assign whole scanned channels to TVFavourite
List or Radio Favourite List.
You can change channel list mode by pressing LIST button or FAV button.
You can assign any scanned channel to TVFavourite List / Radio Favourite List.
After assigned each channel to Favourite List,thenitwillappearinFAV C hannel list.
HereistheTVFavourite List setup procedure.
1) Press MENU to display the menu.
2) Press DOWN to select the Channel Setup menu.
3) Press OK or RIGHTtoenterChannel Setup menu.
5) Press OK or RIGHTtoentertoTVFavourite edit display.
6) If you want add or exclude individual channel, press RIGHTorOK to
select to individual channel list.
7) In this sub menu, press INFO b
utton for display selected channel signal
status. For quit signal status, press INFO button again. It is useful for
duplicate channel presence.
8) Press Menutogoback.
Channel Favourites
4) Press OK or RIGHTtoenterChannel Favourits menu.
2
eMENUSystem
Automatic Channel Scan
Manual Channel Scan
From here, the HD-STB will perform automatic scan the whole channel frequency
for available digital channels. It will take several minutes. In the process of
Automatic Channel Scan, the searched channel will memorize to the internal
memory. After that, you can assign these channels to Favourite Channel List.
1) Press MENU to display the menu.
2) Press DOWN to select the Channel Setup menu.
3) Press OK or RIGHTtoenterChannel Setup menu.
4) Press DOWN to select Automatic Channel Scan.
5) Press OK or RIGHTtogotoSub menu.
6) Press OK to Start Automatic Scan procedure.
7) The Automatic Scan procedure will take several minutes.
8) After finished the Automatic Scan procedure, the searched program will
automatic memorize in the internal memory.
9) The menu will be exit automatically.
You can manually find the program in one of the specific channels. When you
perform Man
ual Channel Scan you need to select the local broadcaster digital
channel number. In this process, the HD-STB will try to find available digital
program in the selected channel number. After finished Manual Channel Scan, the
HD-STB will memorize to the internal memory.
1) Press MENU to display the menu.
2) Press DOWN to select the Channel Setup menu.
3) Press OK or RIGHTtoenterChannel Setup menu.
4) Press DOWN to select manual Channel Scan.
5) Press OK or RIGHTtogotoSub menu.
6) For select Physical Channel, Press RIGHTorOK to display physical
channel table.
7) Press UP/DOWN or PgUp/PgDn
to select physical channel number.
8) Press OK or RIGHT to select the channel you want to manual scan.
9) Press LEFT to return.
10) Press DOWN to select Start Manual Scan.
11) Press OK to Start Manual Scan. Also the progress bar will display
scanning progress.
12) After finished the Manual Channel Scan, the searched program will
automatically memorized to the internal memory. Press MENU to go
back.
To Next Page
Loading...