24. MUTE
Activate TV/HDTV's mute operation.
25. OK(STB Mode)
26. Left / Right
27. MENU (STB Mode)
28. EPG (Electronic Program Guide - STB mode)
29. INFO (STB Mode)
30. FREEZE (STB mode)
31. ZOOM(STB Mode)
32. YELLOW (F3)
33. BLUE (F4)
34. WIND
35. PAU SE
36. REC
Inthemenusystem,movethecursorleftorright.
Enter STB menu. Whilst in the STB menu, this key also functions as the BA C K key.
Activate Electronic Program G uide information broadcast by the DTV networks.
Zoom out 4:3 pillar box black bars. (Available on HD YPbPrandHDMI only)
YELLOW button. Also worked with function 3 button.
In the VCR or DV D mode,itworkedwithWIND button.
In the VCR or DV D mode,itworkedwithREC button.
Confirm current menu item selection.
Display current channel information. You can see the information of current channel.
Freeze the current picture while audio continues normally in the background.
BLUE button. Also worked with function 4 button.
In the VCR or DV D mode,itworkedwithPAU SE button.
7
Overview of the equipment
Installing the remote control batteries
Remote Control Universal Code Setting
1) Open the battery compartment on the back of the remote control.
2) Install two AAA (LRO3) size batteries as shown.
Makesurethe"+"and"- " terminals are oriented correctly.
3) Replace the cover.
4) After changing the batteries, please reset Remote Control Universal Code
Setting.
1) Turn on the CE component (TV, VCR or DV D) you want to control.
2) CE component (TV, VCR or DVD)
3) CE component (TV, VCR or DVD)
1. Using Automatic Code Search
Cautions:
Always replace batteries in pairs of the same brand. Donotmixbatteriesfromdifferent
brandsoruseanoldandanewbattery.
Replace old or weak batteries to avoid battery leakage which can damage the remote control.
Dispose old batteries thoughtfully with due respect to the environment. Do not incinerate old
batteries.
This Remote Control is also compatible with a range of popular CE brands.
To use this remote with other CE equipment, you must program the remote with a universal
codenumberasdetailedonpage36.
Therearetwomethodsof enteringtheuniversalcode.
Press and hold the button until the LED on the
remote control stays on, then release the button.
Point the remote at the and press the UP ()
button, then wait for three seconds or until the LED stops flashing.
Atthispointtheremotecontrolissearchingforthecorrectcode.If,afterthree
To Next Page
Loading...