Nibe ACVM 270 User Manual

Front panel, indoor module
A BI II III I II
13.43
1.0
A
5 0 . 0 ° C
- Scroll forward in the menu system.
- Increase the value of the selected
parameter
- Scroll back in the menu system.
- Reduce the value of the selected
parameter
- Select lower menu in the menu system.
- Parameter change activated
- Parameter change confirmed
During normal operation, the status lamp
lights green.
In the event of an alarm, it lights red.
The change does not need to be
confirmed with the Enter button.
Pressing the button (the change does not
need to be confirmed with the enter
button).
-Current operating mode is shown in the
display.
-Further button pressing changes
operating mode.
Press the enter button to return to the
normal display mode.
For information about the various operating
modes, see the different sections regarding
comfort settings.
Pressing the button takes you directly to
menu 1.0.
- Heating or cooling demand
"A" Heating mode
"B" Cooling mode
If the electrical addition is connected
”I” Electrical step 1
”II” Electrical step 2
”II” Electrical step 3
More than one electrical step can be connected
at the same time.
Additional heat symbol
Compressor symbol
Hot water temp.
Operating status
Extra hot water (XHW)
Menu 1.0
Normal mode
Switch
1
All control functions connected.
Shutdown
0
Only the circulation pump and
electrical addition (electrical step 2)
are operational.
Emergency mode
Hot water symbol
The heat pump charges hot water.
Temporary temperature increase in
progress.
Time based temperature increase in
progress, e.g. periodic.
"A"
"B"
A BI II III I II I II
A B
A BI II III I II I II
A B
A BI II III I II
50.0°C
V a r m v attentemper atur
13.43
1.0
P
50.0°C
V a r m v attentemper atur
13.43
1.0
P
13.43
1.0
P
A
50.0°C
V a r m v attentemper atur
A BI II III I II I II
A B
13.43
1.0
P
50.0°C
rätt
rätt
Circulation pump symbol
Circulation pump in operation.
With two circulation pumps (requires
accessory ESV ), the operating pump is
also indicated.
Climate system symbol
Heating/cooling in progress.
A BI II III I II I II
A B
A BI II III I II I II
A B
A BI II III I II
50.0°C
V a r m v attentemper atur
13.43
1.0
P
50.0°C
V a r m v attentemper atur
13.43
1.0
P
13.43
1.0
P
A
50.0°C
V a r m v attentemper atur
A BI II III I II I II
A B
13.43
1.0
P
50.0°C
rätt
rätt
Description of current display parameter
Information symbols
Menu number
A BI II III I II I II
A B
A BI II III I II I II
A B
A BI II III I II
50.0°C
V a r m v attentemper atur
13.43
1.0
P
50.0°C
V a r m v attentemper atur
13.43
1.0
P
13.43
1.0
P
A
50.0°C
V a r m v attentemper atur
A BI II III I II I II
A B
13.43
1.0
P
50.0°C
rätt
rätt
Key lock activated.
A BI II III I II I II
A B
A BI II III I II I II
A B
A BI II III I II
50.0°C
V a r m v attentemper atur
13.43
1.0
P
50.0°C
V a r m v attentemper atur
13.43
1.0
P
13.43
1.0
P
A
50.0°C
V a r m v attentemper atur
A BI II III I II I II
A B
13.43
1.0
P
50.0°C
rätt
rätt
Plus button
Minus button
See the section "Control – General"
Enter button
Status lamp
A BI II III I II I II
A B
A BI II III I II I II
A B
A BI II III I II
50.0°C
V a r m v attentemper atur
13.43
1.0
P
50.0°C
V a r m v attentemper atur
13.43
1.0
P
13.43
1.0
P
A
50.0°C
V a r m v attentemper atur
A BI II III I II I II
A B
13.43
1.0
P
50.0°C
rätt
rätt
See the section "Control – General"
See the section "Control – General"
- Turning clockwise (+) increases the
room temperature (if room sensors are
not used).
When the knob is turned menu 2.0 is
shown on the display and the value for
the current supply temperature changes.
Offset heating curve
Defrosting symbol
Defrosting in progress.
A BI II III I II
13.43
1.0
A
5 0 . 0 ° C
Displayed with all activated scheduling.
Clock
See the section "Control – Menu 7.0"
NIBE™ SPLIT ACVM 2708
For Home Owners
Front panel, indoor module

Nibe ACVM 270 Specifications

General

Brand	Nibe
Model	ACVM 270
Category	Air Conditioner
Language	English