Nibe F2040 Series User Manual

A
Accessories, 59
Addressing via cascade connection, 42
Adjustment, charge flow, 45
Alarm list, 56
Ambient temperature sensor, 38
Assembly, 9
B
Basic actions, 48
C
Charge pump, 27
Commissioning and adjusting, 43
Adjustment, charge flow, 45
Compressor heater, 43
Filling and venting the heating medium system, 43
Preparations, 43
Readjusting, heating medium side, 45
Start-up and inspection, 44
Communication, 39
Compressor heater, 43
Condensate drip tray, 10
Connecting accessories, 29
Connection between F2040 and SMO, 40
Connections, 33
Connection to board (AA23, 52
Connection to board (PWB1), 50
Control, 46
Menu 5.11.1.1 – Heat pump EB101, 46
Country specific information, 6
D
Delivery and handling, 9
Assembly, 9
Condensate drip tray, 10
Installation area, 10
Removing the covers, 12
Removing the front panel, 13
Removing the side panel, 14
Supplied components, 11
Transport and storage, 9
Dimensions and setting-out coordinates, 60
Disturbances in comfort, 48
Troubleshooting, 48
Docking alternatives, 29
E
Electrical circuit diagram, 76
Electrical connection, 23
Electrical connections, 30
Addressing via cascade connection, 42
Ambient temperature sensor, 38
Communication, 39
Connecting accessories, 29
Connection between F2040 and SMO, 40
Connections, 33
External heating cable (KVR 10) (Accessory), 37
General, 30
Power connection, 33
Energy labelling, 71
Data for energy efficiency of the package, 71
Information sheet, 71
Technical documentation, 72
Environmental information, 5
External heating cable (KVR 10) (Accessory), 37
F
F2040 does not communicate, 48
F2040 is not operational, 48
Filling and venting the heating medium system, 43
G
General, 27, 30
H
High room temperature, 49
I
Important information, 4
Country specific information, 6
Environmental information, 5
Inspection of the installation, 7
Recovery, 5
Safety information, 4
Safety precautions, 4
Serial number, 4
Inspection of the installation, 7
Installation area, 10
L
Large amount of water below F2040, 49
List of components, 22
Low hot water temperature or no hot water, 49
Low room temperature, 49
M
Marking, 4
Menu 5.11.1.1 – Heat pump EB101, 46
85Item registerNIBE F2040
Item register

Nibe F2040 Series Specifications

General

Series	F2040
Refrigerant	R410A
COP	Up to 5.0 (depending on model and operating conditions)
Sound Power Level Indoor Unit	N/A (Requires separate indoor unit)
Operating Temperature Range Cooling	+10°C to +43°C
Dimensions Indoor Unit (HxWxD)	N/A (Requires separate indoor unit)
Type	Air Source Heat Pump