Nibe F2040 Series User Manual

P
Pipe connections, 27
Charge pump, 27
Docking alternatives, 29
General, 27
Pipe connections flex hose, 28
Pipe coupling heating medium circuit, 27
Pressure drop diagram, 28
Water volumes, 27
Pipe connections flex hose, 28
Pipe coupling heating medium circuit, 27
Power connection, 33
Preparations, 43
Pressure drop diagram, 28
R
Readjusting, heating medium side, 45
Recovery, 5
Removing the covers, 12
Removing the front panel, 13
Removing the side panel, 14
S
Safety information, 4
Marking, 4
Symbols, 4
Symbols on F2040, 4
Warranty information, 6
Sensor placement, 50
Connection to board (AA23, 52
Connection to board (PWB1), 50
Sensor placement in F2040, 53
Sensors etc., 50
Sensor placement in F2040, 53
Sensors etc., 50
Serial number, 4
Sound pressure levels, 64
Start-up and inspection, 44
Supplied components, 11
Symbols, 4
Symbols on F2040, 4
T
Technical data, 60
Dimensions and setting-out coordinates, 60
Electrical circuit diagram, 76
Sound pressure levels, 64
Technical Data, 65
Technical Data, 65
The heat pump design, 15
Component locations, 15
Electrical components, 26
Electrical connection, 23
List of components, 22
Transport and storage, 9
Troubleshooting, 48
Basic actions, 48
F2040 does not communicate, 48
F2040 is not operational, 48
High room temperature, 49
Large amount of water below F2040, 49
Low hot water temperature or no hot water, 49
Low room temperature, 49
Sensor placement, 50
W
Warranty information, 6
NIBE F2040Item register86

Nibe F2040 Series Specifications

General

Series	F2040
Refrigerant	R410A
COP	Up to 5.0 (depending on model and operating conditions)
Sound Power Level Indoor Unit	N/A (Requires separate indoor unit)
Operating Temperature Range Cooling	+10°C to +43°C
Dimensions Indoor Unit (HxWxD)	N/A (Requires separate indoor unit)
Type	Air Source Heat Pump