Marking, 4
Menu 5 - SERVICE, 45
Menu system, 40
Help menu, 33, 42
Operation, 41
Scroll through the windows, 42
Selecting menu, 41
Selecting options, 41
Setting a value, 41
Use the virtual keyboard, 42
Miniature circuit-breaker, 21
N
NIBE Uplink, 28
O
OK button, 39
Operation, 41
Optional connections, 28
Outdoor sensor, 24
Output locking, 26
P
Pipe and ventilation connections, 16
Adjusting ventilation, 20
Cold and hot water, 18
Connecting cold and hot water, 18
Connecting the climate system, 18
Dimensions and pipe connections, 17
Exhaust air duct, 20
General pipe connections, 16
General ventilation connection, 20
Heating medium side, 18
Installation alternative, 19
Maximum boiler and radiator volumes, 16
Pipe dimensions, 17
Setting out dimensions, 17
Supply air battery, 19
Symbol key, 18
System diagram, 16
Ventilation flow, 20
Pipe dimensions, 17
Possible selection for AUX inputs, 29
Possible selection for AUX output (potential free variable relay), 30
Power connection, 23
Preparations, 32
R
Remove parts of the insulation, 13
Removing the cover, base board, 22
Removing the cover, immersion heater circuit board, 22
Removing the covers, 13
Removing the hatch, input circuit board, 22
Room sensor, 25
S
Safety information
Handling, 4
Inspection of the installation, 11
Marking, 4
Safety precautions, 4
Serial number, 10
Symbols, 4
Symbols on F470, 4
Safety precautions, 4
Collection, 8
Decommissioning, 7
Filling, 7
Leak testing, 6
Marking, 8
Removal and draining, 7
Repairing sealed components, 6
When working in the refrigerant circuit, 9
Wiring, 6
Scroll through the windows, 42
Selecting menu, 41
Selecting options, 41
Serial number, 10
Service, 50
Service actions, 50
Service actions, 50
Draining the climate system, 50
Draining the hot water heater, 50
Helping the circulation pump to start, 51
Standby mode, 50
Temperature sensor data, 51
USB service outlet, 52
Setting a value, 41
Setting out dimensions, 17
Settings, 26
Standby mode, 50
Power in emergency mode, 27
Start guide, 33
Start-up and inspection, 33
Commissioning without fans, 35
Setting the pump speed, 36
Setting the ventilation, 34
Supply air battery, 35
Status lamp, 39
Supplied components, 13
Supply air battery, 19
Switch, 39
Switch for "Smart Grid ready", 29
Switch for external blocking of addition and/or compressor, 29
Switch for external blocking of heating, 29–30
Symbol key, 18
Symbols, 4
Symbols on F470, 4
System diagram, 16
T
Technical data, 57
Dimensions and setting-out coordinates, 57
Electrical circuit diagram, 64
Technical Data, 58
Technical Data, 58
Temperature limiter, 21
Resetting, 21
Temperature sensor data, 51
The heat pump design, 14
Component locations, 14
List of components, 15
Transport, 12
Troubleshooting, 54
U
USB service outlet, 52
Use the virtual keyboard, 42
V
Ventilation flow, 20
Venting the climate system, 32
83Chapter 13 | Item registerNIBE F470
To Next Page
Loading...
Need help?
General
