EasyManua.ls Logo

Nibe VVM 300 - Miscellaneous; Control System Interface

Nibe VVM 300
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26 NIBE VVM 300
Miscellaneous
A B A B A BI II III
54.1°C
Hotwatertemp.
1.0
13.43
General
The menu tree shows all the menus. Three different menu
types can be chosen.
Normal, covers the normal user's needs.
Extended, shows all menus except the service men-
us.
Service, shows all menus, returns to normal 30 min-
utes after the last button was pressed.
Changing of menu type is done from menu 8.1.1
Information is presented on the display about the status of
the heat pump and the electric boiler. Menu 1.0 is normal-
ly shown on the display screen. The plus and minus but-
tons and the enter button are used to scroll through the
menu system as well as to change the set value in some
menus.
The Plus button is used to move forward to
the next menu on the current menu level
and to increase the value of the parameter in
menus where this is possible.
The Minus button is used to move back to
the previous menu on the current menu level
and to decrease the value of the parameter
in menus where this is possible.
The Enter button is used to select submenus
of the current menu, to permit parameters
to be changed and confirm any changes to
parameters. When the menu number ends
with a zero this indicates there is a submenu.
Control
1
8
6
Menu name
Menu number Key lock
Clock
Symbols Value of the current parameter
Control
Key lock
A key lock can be activated in the main menus by simulta-
neously pressing the Plus and the Minus buttons. The key
symbol will then be shown on the display. The same proce-
dure is used to deactivate the key lock.
Quick movement
To quickly return to the main menu from sub-menus press
the lower button on the left hand side.

Table of Contents

Other manuals for Nibe VVM 300

Related product manuals