Nibe VVM 300 - Changing Parameters; Example

8.1.0
Display settings
...
...
...
8.5
Return
8.0
Other adjustments
8.1.1
Menu type
8.1.2
Language
8.1.3
Display contrast
8.1.4
Light intensity
8.1.5
Return
27NIBE VVM 300
Miscellaneous
Control
Changing a parameter (value)
Q Access the required menu.
Q Press the enter button, the numerical value starts to
flash
Q Increase or decrease the value with the Plus/Minus but-
tons.
Q Confirm by pressing the enter button.
Q Menu 1.0 is automatically displayed again 30 minutes
after the last button press.
Example
Changing the Menu type, menu 8.1.1.
Q The starting point is menu 1.0.
Q Press the plus or minus button several times until the
menu displays 8.0.
Q Press the enter button to access menu 8.1.0.
Q Press the enter button to access menu 8.1.1.
Q Press the enter button to allow the value to be
changed.
Q The value now flashes. Change the value by pressing
the plus or minus buttons.
Q Confirm the selected value by pressing the enter but-
ton and the value stops flashing.
Q Press the minus button to move to menu 8.1.5.
Q Press the enter button to return to menu 8.1.0.
Q Press the plus button 3 times to access menu 8.4.
Q Press the enter button to return to menu 8.0.
Q Press the plus or minus button several times to access
menu 1.0.
Changing parameters