mindy A400
Avvertenze:
This manual has been especially written for use by
qualified fitters. No information given in this manual can be
considered as being of interest to end users!
This manual refers to the A400 control unit and may not be
used for different products.
The A400 control unit has been designed to control electromechanical
actuators for automated swing gates or doors; any other use is
considered improper and is consequently forbidden by current laws.
Do not install the unit before you have read all the instructions at least
once.
Table of contents: pag.
1 Product description 3
2 Installation 3
2.1 Preliminary checks 3
2.2 Fixing the A400 control unit 4
2.3 Typical system layout 4
2.4 Electrical connections 4
2.4.1 Electrical diagram 5
2.4.2 Description of connections 5
2.4.3 Notes on connections 6
2.4.4 Phototest 6
2.4.5 Checking connections 7
2.5 Searching for mechanical stops 7
2.5.1 Automatic searching 8
2.5.2
Searching with the current sensitivity device disabled
8
3 Programmable functions 9
3.1 Pre-set functions 9
pag.
4 Programming 10
4.1 Memory deletion 10
4.2 Programming methods 10
4.2.1 Level one programming: functions 11
4.2.2 Level two programming: parameters 11
4.2.3 Example of level one programming 12
4.2.4 Example of level two programming 12
4.2.5 Programming diagram 13
5 Testing 14
6 Optional accesories 14
7 Servicing the A400 control unit 14
7.1 Disposal 14
8 What to do if ... 15
9 Technical specifications 15
Annex:
SMXI Radio receiver 16
To Next Page
Loading...
Need help?
General
