2
spido table of contents
Warning:
This manual has been especially written for use by
qualified fitters.
No information given in this manual can be considered as
being of interest to end users!
This manual refers to the SP6000 gear motor and may not be
used for different products!
The control unit has been designed to control electromechanical
actuators for automated sectional and up-and-over doors; any other use
is considered improper and is consequently forbidden by current laws.
Do not install the unit before you have read all the instructions at least
once!
Indice: page
1 Product description 3
2 Installation 3
2.1 Preliminary checks 3
2.2 Typical system layout 3
2.3 Electrical connections 4
2.3.1 Electrical diagram 4
2.3.2 Description of connections 4
2.3.3 Notes on connections 5
2.3.4 Photo-test 5
2.3.5 Checking connections 5
3 Programmable functions 5/6
3.1 Pre-set functions 6
page
4 Programming 6
4.1 Programming pauses 6
4.2 Programming current sensitivity 7
4.3 Programming the photo-test mode 7
5 Testing 8
6 Maintenance 8
6.1 Disposal 8
7 What to do if ... 8
8 Technical specifications 9
Annex:
SMXI radio receiver 10
To Next Page
Loading...
