16
FUNCTION BUTTONS
Load a CD disc.
Use numeric key to input the Track numbers,
Repeat inputting the track numbers until
programming is completed.
Press PROGRAM button,
the CD programme menu will appear.
To clear the last input, press CLEAR button.
Highlight the "NEXT" icon to enter the next page.
Highlight the "Start" icon to confirm.
Press ENTER button to start the programme playback.
Highlight the "EXIT" icon and press ENTER button
to quit programme menu.
PROGRAM
CLEAR
ENTER
CD programme menu
In programme playback mode,press STOP button twice
to cancel the programme playback.
For CD, the programme function is same as DVD disc.
PROGRAMME funtion does not apply to MP3, MPEG 4 and picture CD.
NOTE
INFO
Press INFO button to switch the OSD indicator on or off.
There are different OSD indicators for different types of
discs: DVD, MPEG4, CD and Picture CD.See "ON
SCREEN DISPLAY" in this manual for the display detail.
This button has different functions in DVD or DVB mode.
In DVD mode:
INFO
In DVB mode:
Press the INFO button to display information about the
channel being viewed.The information is shown as below:
INFO
CA
CH-01 TV news
+
2006/12/19 10 25 28
Audio: 01/01 eng
Press the INFO button again to display all
information including signal strength and quality
shown as below:
Signal Strength:
Signal Quality:
0%
100%
TV
Programme: Track (01-16)
12
09
05
--
--
--
--
--
--
--
Exit Start NEXT
1
6
2
3
4
5
7
8
9
10
To Next Page
Loading...