311Technical Notes
Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power
connector and AC adapter.
1 Ready the camera.
Open the battery-chamber (q) and
power connector (w) covers.
2 Insert the EP-5A power connector.
Be sure to insert the connector in the
orientation shown, using the
connector to keep the orange battery
latch pressed to one side.
Be sure the
connector is fully inserted.
3 Close the battery-chamber cover.
Position the power connector cable so
that it passes through the power
connector slot and close the battery-
chamber cover.
To Next Page
Loading...
