135
Q
Connecting the Camera
Connect the camera using the supplied USB cable.
1 Turn the camera off.
2 Turn the computer on.
Turn the computer on and wait for it to start up.
3 Connect the USB cable.
Connect the USB cable as shown.
Do not use force or attempt to insert the
connectors at an angle.
4 Turn the camera on.
5 Transfer photographs.
Nikon Transfer will start automatically; click
the Start Transfer button to transfer
photographs (for more information on using
Nikon Transfer, select Nikon Transfer help
from the Nikon Transfer Help menu).
6 Turn the camera off and disconnect the USB cable when transfer ends.
Nikon Transfer will close automatically when transfer is complete.
D USB Hubs
Connect the camera directly to the computer; do not connect the cable via a USB hub
or keyboard.
Start Transfer button
To Next Page
Loading...
