If you want to find the point by PT name, type in the
name and press the [ENT] key twice to start search.
Type the PT and/or CD. The asterisk (*) can be
used as a wildcard.
3
MENU: 4. Data
For example, when you input “30*” in the PT field,
Pt:300, 301, 302, 3000A2, 3010…etc. can be found.
• Search can be done by the point type. Place the
cursor on “Type” field and use the Right/Left arrow
keys to toggle items among
ALL/ST/SS/SO/CP/CO/CO(RDM).
• When you specified “ST/SO/F1/F2” in “Type” field, the search will be initiated by
pressing the [ENT] key in the “PT” field. You don’t have to input “CD” for those
types.
• When you specified “CO/CO(SY)/CO(RDM)” in “Type” field, the cursor will not move
to “PT” and “CD”. Search will start by [ENT] key in the “Type” field.
When several points are found matching the search
criteria, they are shown in a list form.
Select a point on the list by using the Up/Down
arrow keys and pressing [ENT].
Detailed data of the selected record is displayed.
Press the [ESC] key to return to the list screen.
On this screen, the [DSP] key is also available to
change the contents.
3-115
To Next Page
Loading...
