5
SPECIFICATIONS
Weight
Main unit: Approx. 4.9kg/10.80lbs.
Battery BC-80: Approx. 0.6kg/1.32lbs.
Quick charger Q-75U/E: 0.45kg/0.99lbs.
Carrying case: Approx. 4.0kg/8.82lbs.
5-2. Standard Components
DTM-502 main body: 1
Battery pack BC-80: 1
Quick charger Q-75U or Q-75E: 1
Tool set: 1
Objective lens cap: 1
Vinyl cover: 1
Instruction manual: 1
Carrying case: 1
Shoulder strap: 1
5-3.
External Device Connection Connector
This connector is used commonly as a power source connector and a
communication connector with an external device.
Confirm the specifications below and observe the cautions on the next page.
Input voltage: DC7.2 - 11V
System: RS-232C, Asynchronous
Signal level: ±9V Standard
Rate: 38400bps Max.
Compatible male connector: Hirose HR10A-7P-6P or
Hirose HR10-7P-6P
Hirose HR 10A-7R-6S
1 RxD: Reception data (Input)
HRS
16
25
34
2 TxD: Send data (Output)
3 +
5 –
4, 6: No connection
5-4
To Next Page
Loading...
