Chapter 3 Individual Operations
3.1 Power ON/OFF
35
3
3.1
Power ON/OFF
3.1.1
Turning on the microscope
To turn on the microscope, press the power switch
to the “|” position.
To turn off the microscope, press the power switch
to the “
◯
” position.
3.1.2
Turning on the cytodiagnostic unit
Depress the power switch to turn on the
cytodiagnostic unit.
Turning on the unit starts initialization and sets
the magnification of the cytodiagnostic unit to
the 10x setting.
The “10x” magnification indicator lights.
Press the power switch. The switch pops out, and
the cytodiagnostic unit is switched off.
The magnification indicator turns off.
3.1.2
Turning on the fluorescence attachment light source
(mercury lamp)
Refer to the operating manual provided with the super high-pressure mercury lamp power
supply unit.
Always observe all warnings and precautions described in the manual.
Power switch
Magnification
indicator
Cytodiagnostic
unit power
switch
To Next Page
Loading...
