Chapter 4 Assembly
61
4
Cables provided with the cytodiagnostic unit
(1) J-CY/PS cable
(2) J-CY/SG cable (both ends are identical)
(4) Install a fully recharged battery (when using the 55i
on battery power).
Insert the battery into the battery holder.
If the 55i is running on battery power, there is no
need to connect the AC adapter to the J1 connector
(12V DC input) at the rear of the 55i.
Always use the specified battery type
(EN-EL1).
Batter
To Next Page
Loading...
