How to fix uneven focus on Nikon eclipse fn1?
If the focus is uneven on your Nikon Microscope, check the following: * Push the slide click release button and slide the sliding nosepiece to the click-stop position. * Attach the specimen securely. * Install the stage correctly.
Why is the image elongated on my Nikon eclipse fn1?
If the image appears elongated on your Nikon Microscope, check these potential causes: * Ensure the nosepiece is in the click-stop position by pushing the slide click release button. * Secure the specimen on the stage surface. * Center the condenser. * Make sure the stage is correctly installed and not tilting.
How to fix blurry binocular view on Nikon eclipse fn1?
To resolve the issue of the image not resolving into a single image when viewing through the binocular eyepiece of your Nikon Microscope: * Adjust the interpupillary distance. * Adjust the diopters.
How to adjust specimen movement sensitivity on Nikon Microscope?
If the specimen movement is too sensitive on your Nikon Microscope, adjust the torque for the stage handle tighter.
General| Type | Upright Microscope |
|---|---|
| Optical System | Nikon CFI60 optical system |
| Illumination | Transmitted light illumination |
| Camera | Compatible with various Nikon digital cameras |
| Focusing | Manual coarse and fine focus knobs |
Essential safety warnings, cautionary symbols, and handling advice for microscope operation.
Specific safety measures for mercury, xenon, and hot lamp house components to prevent injury.
Guidelines for careful handling, avoiding shock, and protecting optical components.
Advice on selecting an appropriate installation site and environmental conditions.
Identification of the primary physical components of the ECLIPSE FN1 microscope.
Overview and identification of the TE2-PS100W power supply unit.
Operation of focus knobs, sliding nosepiece, and objective switching procedures.
Adjustments for eyepiece tubes, optical paths, double port, and polarizer turret.
Procedures for adjusting the LWD condenser, field diaphragm, and aperture diaphragm.
Steps for installing the lamp house and connecting the power supply.
Assembling the nosepiece, stage, and attaching the LWD condenser.
Procedures for attaching epi-fl, DIC, and other optical modules.
Connecting light sources, cables, and securing the microscope main body.
Solutions for common viewing issues, brightness, focus, and alignment problems.
Troubleshooting for lamp not lighting, flickering, or unstable brightness.
Guidelines for cleaning lenses, components, and proper storage methods.
Specifications for the ECLIPSE FN1, including optical systems and power ratings.
Operating conditions, transport guidelines, and safety certifications.
To Next Page