25
(800) BUY-HIFI NILES AUDIO CORPORATION
INSTALLING THE MASTER KEY LABELS
TO INSTALL THE MASTER KEY LABELS (Figure 6):
1. Locate the Master Key keycaps. (Keycaps DO NOT come installed for
the iRemote).
2. Place labels from the included label sheet face down inside the keycap.
3. Place the caps in the appropriate key locations. (Refer to the GXR2 Installation
Worksheet to assure proper position).
Note: Keycaps may need noticeable force to install correctly.
Step 1: Label sheet removal.
iRemote shown.
Step 2: Insert label face down in keycap.
13&7
/&95
0'' .65&
70-
70-
o
Single Keypad shown.
Step 3: Place keycap over Master Key and snap into place.
Display Keypad shown.
GETTING STARTED
Figure 6.
To Next Page
Loading...
Need help?
General