Squeegee System 55Service Manual – SC351
Squeegee System
Functional Description
The squeegee system cleans the liquid off the oor, which is then collected by the recovery system.
The squeegee is fastened to the brush deck by 2 hooks and the vacuum hose.
When the machine is running, the conformation of the squeegee and the brush deck rotation mechanism, assist
in the alignment and accurate vacuuming of the water from the oor. The 2 blades have different hardness:
- Front blade; with ruled side to convey the water towards the centre of the squeegee.
- Rear blade; smooth, to collect the water and dry the oor.
All 4 functional edges of each blade can be used before replacing the blade itself.
The design and the central duct make it easy for the squeegee to clear the water.
To Next Page
Loading...
Need help?
General
