Nilfisk-Advance SC450 User Manual

ENGLISH INSTRUCTION FOR USE
22 SC450 - 9099589000
8/12
SOLUTION FILTER CLEANING
1. Empty the solution tank (15) as shown in the relevant paragraph.
2. Drive the machine on a level oor.
3. Check that the switches (41 and 42) are turned to “0” and disconnect the battery connector (8).
4. Unscrew the transparent cover (A, Fig. 9), remove the gasket (B), then remove the lter strainer (C). Clean and install them on
the support (D).
NOTE
Install the gasket (B) and the lter strainer (C) properly on the cover (A) and on the support (D).
A
B
C
D
Figure 9
P100669

Nilfisk-Advance SC450 Specifications

General

Brand	Nilfisk-Advance
Model	SC450
Category	Scrubber
Language	English