10Service Manual – SC6000 03 - General Information
Property Damage Messages
− Storage and operation temperature must be above 0°C and a humidity between 30%
and 95%, non-condensing.
− Before use, all doors and hoods should be properly latched.
− This machine is not approved for use on public paths or roads.
− This machine is only approved for hard surface use.
− Use brushes and pads supplied with the machine or those specied in the User
Manual. Using other brushes or pads could reduce safety.
− Do not wash the machine with direct or pressurised water jets, or with corrosive
substances.
− Do not allow the brush/pad to operate while the machine is stationary to avoid
damaging the oor.
− Use only factory authorized parts and accessories.
− This machine must be properly disposed of in accordance with local laws and
regulations.