USER MANUAL ENGLISH
33019216 - SR 1601 D3 / LPG3 / P3 23
SCHEDULED MAINTENANCE TABLE
NOTE
Maintenance intervals given are for average operating conditions. Machines used in severe operational environments
may require service more often.
Procedure Upon delivery Daily
After the
rst 50
hours
Every 30
hours
Every
150
hours
Every
300
hours
Every
1,000
hours
Engine coolant check
Engine oil level check
Hydraulic oil level check
Parking brake check
Main and side broom cleaning
Engine oil change (1) (1)
Oil lter element replacement (1) (1)
V-belt check (1) (1)
Engine coolant circuit check (1)
Battery check
Dust guard system water lter check and
cleaning (optional)
Engine air lter cleaning (2)
Engine radiator and oil cooler cleaning
Broom check and adjustment
Hopper dust lter check and cleaning (“A”
method)
(2)
Skirt integrity, height and operation check
Hopper gasket integrity check
Engine maintenance (1) - (3)
Steering wheel bearing and hydraulic piston
lubrication
(1)
Tank hydraulic oil lter replacement (1)
Pump hydraulic oil lter replacement (1)
Hopper dust lter check and cleaning (“B”
method)
(2)
Fuel lter replacement (1)
Fuel tting and screw tightening (1)
Hopper dust lter check and cleaning (“C”
method)
(2)
Supply hose replacement (LPG3) (1)
Hydraulic oil “recharge” lter replacement (1)
Tank hydraulic oil change (1) - (4)
(1) For the relevant procedure, see the Service Manual.
(2) Or more often in dusty areas.
(3) Maintenance procedures to be performed by an authorised KUBOTA dealer.
(4) Change the hydraulic oil for the rst time after 500 hours, then every year.
33019216(4)2012-03 A.indb 23 10/04/2012 15:52:52
To Next Page
Loading...
Need help?
General
