4
ATTIX 30-50 H/M
Electrical tests must be per formed in accordance with the provisions
of safety regulations (BGV A3) and to DIN VDE 0701 Part 1 and Part
3. In ac cord ance with DIN VDE 0702 these tests must be performed
at regular intervals and after repairs or modifications.
Our general conditions of business are applicable with regard to the
guarantee.
Unauthorised modifications to the appliance, the use of incorrect
brushes in addition to using the appliance in a way other than for the
intended purpose exempt the manufacturer from any liability for the
resulting damage.
Tests and approvals
Before removing the vacuum cleaner from the area contaminated
with harmful substances:
Clean the outside of the vacuum cleaner, wipe it clean or pack 1.
the vacuum cleaner in well sealed packaging
and avoid spreading deposited harmful dust.2.
During maintenance and repair work all contaminated parts that
could not be cleaned satisfactorily must be:
packed in well sealed bags1.
disposed of in a manner that complies with valid regulations for 2.
such waste removal.
A dust test must be performed at least once every year by Nilfisk-
ALTO service or a trained person. This test includes, for example,
whether there is damage to the filter, the vacuum cleaner is sealed
to the air and the control equipment works properly.
Warranty
Risks
Electrical components
DANGER
Electric shock due to faulty mains connecting lead.
Touching a faulty mains connecting lead can result in
serious or even fatal injuries.
Do not damage the mains power lead (e.g. by driving 1.
over it, pulling or crushing it).
Regularly check whether the power cord is damaged or 2.
shows signs of ageing.
Have the faulty mains connecting lead replaced by your 3.
Nilfisk-Alto service representative or a qualified electri-
cian prior to using the appliance again.
DANGER
The upper section of the vacuum cleaner contains live
components.
Contact with live components leads to serious or even fatal
injuries.
Never spray water on to the upper section of the vacuum 1.
cleaner.
CAUTION
Appliance socket
1)
.
The appliance socket is only designed for the purposes defined
in the operating instructions. The connection of different
appliances can result in damage.
Prior to plugging in an appliance, always switch off the vac-1.
uum cleaner and the appliance that is to be connected.
Read the operating instructions to the appliance to be con-2.
nected and observe the safety notes contained in these.
1)
Optional accessories / Option depending on model
To Next Page
Loading...
Need help?
General
