Niryo Ned2 - Page 12

Inputs/ Outputs Back
panel
Digital inputs x3
Digital outputs x3
Analog outputs x2
Analog inputs x2
Inputs/ Outputs Control
panel
Digital inputs x1
Digital outputs x1
Robot interface
2 x USB2.0
2 x USB3.0
1 x ETHERNET GIGABIT
Communication
Modbus TCP (master)
TCP/IP
Materials
Aluminum
ABS-PC (injection moulding)
Programming
Environment
Niryo Studio
C++
PyNiryoRos
PyNiryo
ROS
Collision detection Accelerometer and gyroscope in the control panel
Certification CE Conformity
Parameters Value
Tools technical specificationsTools technical specifications
Tools OverviewTools Overview
Ned2 is compatible with 5 different sorts of tools:
3 x Grippers
1 x Electromagnet
1 x Vacuum Pump
SpecificationsSpecifications
Custom Gripper
Ned2 User Manual (v1.0.0)Ned2 User Manual (v1.0.0)
2022, Niryo All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Niryo SAS