Use and maintenance
41
- Untrained personnel using the machine;
- Using the machine so that it does not conform to specific regulations in force in the
country of installation;
- Unauthorized changes and/or repairs to the machine;
- The use of accessories and spare parts that are not original;
- Outstanding events.
If the machine is sold or given away, this automatically means that the manufacturer is no longer
responsible for the machine in question except for anything regarding the EEC directive 1999/34
(responsibility for any construction faults of the product).
2.3 The user’s obligations
The user must scrupulously observe the instructions in this manual for the manufacturer’s guarantee
to be valid and particularly:
- always respect the limits of the machine;
- always carry out a constant and diligent maintenance;
- make sure the people using the machine are qualified and able.
2.4 Markings - Plates
The following plate is installed on the machine: manufacturer’s identification plate, machine plate,
technical data plate and EC marking.
In requests for technical assistance or ordering spare parts, always refer to the
data plate and the serial number of the machine.
To Next Page
Loading...