Use and maintenance
70
10. DISMANTLING THE SLICING MACHINE
The machines are made up of:
- aluminium/magnesium alloy structure;
- insertions and various in stainless steel;
- electric parts and wires;
- electric motor;
- plastic materials, etc.
If disassembly and dismantling are to be carried out by a third party, only consult firms that
are authorized in the demolition of the above mentioned materials.
If you carry out the dismantling yourself the materials must be separated according to type
and consult a specialized firm for their disposal.
Always abide by the regulations in force in your country.
WARNING: In any case it is necessary to consult the maker or qualified personnel
authorized by the maker for removal of the circular blade and subsequent removal of the
cutting wire so that it can be disposed of safely.
DO NOT ABBANDON SCRAPS WHERE THERE IS FREE ACCESS (THERE SHOULD BE
BARRIERS
AND SIGNS) BECAUSE THIS CAN BE VERY DANGEROUS FOR PEOPLE,
SPECIALLY CHILDREN AND ANIMALS; THE OWNER HAS SOLE RESPONSIBILITY.
11. SUMMARY OF RESIDUAL RISKS AND ATTENTION OF THE USE OF THE
MACHINE
WARNING: The safety ring around the blade is made according to the European regulation
(EN 1974:1998) but this protection does not completely eliminate risks in the sharpening
area.
DO NOT use the machine if you are not in perfect psychological and physical conditions and
NOT allow anyone to get close during use.
operate with great attention; NOT get distracted!
Slice only the permitted products; please do NOT try any cutting test with prohibited
products.
WHEN CLEANING, LUBRICATING SHARPENING THE BLADE, ALWAYS USE PROTECTIVE
GLOVES AND CUT RESISTANT TO TEARING. DANGER OF CUTTING!
Do not remove the transparent protection and do not change or exclude the mechanical and
electrical protections.
In requests for technical assistance or ordering spare parts, always refer to the data plate and
the serial number of the machine.
For any exceptional maintenance (replacing grindstones, blade, etc.) please contact the
manufacturer or qualified and authorized personnel.
WARNING: Please do not make cutting tests with forbidden products.
To Next Page
Loading...