12
The earpiece volume can be controlled by the volume keys
vV.
Use V key to increase and v key to decrease volume level.
The volume level is shown on the display. VOLUME 1 indi-
cates the lowest and VOLUME 5 the highest volume level.
If you try to increase or decrease the volume level over
these values, an error
“beep”
is given. (Note that these keys
also act as scroll keys within the recall and menu operations.)
The last number dialed can be redialed automatically,
without re-entering it. (The number can still be retrieved
even if the phone has been switched off and back on.)
1) With the display clear, press SEND.
2) The number you last called will appear on the display
and is automatically redialed.
Last number redial can also be used from the menu:
1) Press MENU.
2) Press v or V repeatedly, until RECALL LAST appears
on the display.
3) Press STO. The last number you dialed will appear on
the display.
4) Press SEND to make the call.
Speed dialing is the quickest way to recall and dial a
telephone number.
When you have stored a frequently used phone number in the
memory you can use the memory location number or name
when dialing the stored number. (See ‘Storing Information’).
1) Key in the number of the memory location (eg. 0,2) or
the name stored there (name uses the ALPHA mode).
2) Press SEND.
The phone will recall the telephone number or name from
memory, display it briefly, and then dial it.
Wait until your call is answered.
SPEED DIALING
LAST NUMBER REDIAL
VOLUME KEYS
To Next Page
Loading...
Need help?
General
Weight and Dimensions
