25
If you want to add DTMF numbers to a stored phone
number place a wait (W) character in front of the DTMF
numbers. Press MENU # #.
When you recall the information (telephone number and
DTMF numbers) from the memory (RCL), press SEND to
call the number stored before the wait character.
The telephone number disappears from the display. Wait
for answer.
Send the last part as DTMF tones by pressing MENU
followed by SEND or MENU 8.
Note that when the key tones are turned off the DTMF tones
are still sent even though you cannot hear them.
Each cellular service area can have two cellular service
suppliers called carriers. One carrier is called the ‘non-
wireline’ or ‘A’ system and the other carrier is called the
‘wireline’ or ‘B’ system. Your phone is designed to work with
either or both carriers.
The system priority feature allows you to program your phone
for optimum operation when in your home serving area or
when away from your home area. This is called roaming.
When you buy your phone, you may register (receive a
phone number) with either or both of your local carriers.
Contact the office of your home cellular phone company for
information about the roaming agreements they have with
other cellular phone companies.
In some areas, roaming telephones are automatically
recognized by the cellular system’s computer. In other
areas, you must contact the cellular phone operator before
it can recognize your phone. The company needs to know
your telephone number, your phone’s ESN (electronic
serial number), and how you plan to pay for your calls.
There is usually an additional charge for roaming calls.
Note: The ESN for your mobile phone is located in the
battery compartment of the phone.
To Select the Roaming Mode:
1) Press MENU 1. OR Press MENU, then press v or V keys
until SYSTEM SELECT appears. Press STO.
ROAMING
To Next Page
Loading...
Need help?
General
Weight and Dimensions
