20
Any number previously stored in the scratchpad
memory will be lost.
4) To recall the number, press RCL # #, then to call the
number, press SEND.
5) To move a number from scratchpad memory to a
permanent memory location, recall it, then store it as
described in ‘Storing Information’.
Your phone number is stored in memory location 49.
1) Press RCL 49 to display it OR
Press MENU, then press v or V keys until NAM SELECT
appears. Press STO.
Note that if your phone is registered on two cellular
networks, the number displayed will be for the network that
is currently being used (see section ‘Using The Phone on
Two Networks’).
Your phone has a simple security system. It can be locked
by using a four-digit lock code to prevent unauthorized
use.
The lock code is supplied by the dealer. If you forget
your lock code contact your dealer. The factory default
lock code is 1234.
When the phone is locked, only emergency calls (911,
*911) and calls to the number in memory location 48 can
be made, but any call can be received. Storing to the
memory is also prevented.
1) Press MENU 0. OR Press MENU, then press v or V keys
until LOCK PHONE appears.
Press STO.
2) The display will read
‘LOCKCODE?’.
To Next Page
Loading...
