23
These tones sound each time you press a key. You can
turn the keypad tones on or off.
1) Press MENU 5. OR Press
MENU, then press v or V keys
until KEYPAD TONES appears.
Press STO.
2) Use v or V to switch them
ON or OFF.
3) Press STO.
Note: When the key tones are
switched off, DTMF tones can still
be sent.
The ringing tone sounds when there’s an incoming call.
You can select the volume of the tone or switch it off,
(SILENT SERVICE).
1) Press MENU 6. OR Press MENU, then press v or V keys
until RINGING VOLUME appears.
Press STO.
2) Use v or V to select HIGH,
LOW or SILENT SERVICE.
3) Press STO.
If you select SILENT SERVICE the message SILENT is
displayed after a brief delay. This will remind you that
the ringing tone is off. When a call is coming in, a short
“beep”
will sound and the display and keypad lights will
flash. (The CALL message will also appear on the display.)
Note: All other tones will also be turned off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
