27
Note: Keyguard function is only available for version THA-6/B
and THA-62/B. Please see type label of the phone.
The phone is equipped with a handy keyguard function
which, when activated, prevents accidental keypresses for
example, when the phone is in your pocket. When the
keyguard function is activated, no keybeeps are heard and
no keypresses are accepted, except emergency numbers.
To activate the keyguard function:
1) Press MENU
*
. The KEYGUARD ACTIVE message
appears on the display.
If activation takes place during a call, the message is
shown for a while and the keyguarding begins just after the
call is ended.
When the keyguard is active the KEYGUARD ACTIVE
message is shown. When any key is pressed the PRESS
MENU
*
message is shown.
If you receive a call the phone starts to ring and the blinking
CALL message is shown. To answer the call, with keyguard
activated, press SEND (anykey answer is disabled).
During a call the keyguard is not active and you can
operate the phone in the usual way. If the incoming call is
not answered the CALL message will remain on the
display.
Calls to emergency numbers can be made as usual. After
the emergency call, keyguard function becomes active
again.
To deactivate the keyguard function:
1) Press MENU
*
. The KEYGUARD OFF message
appears and the phone starts to operate in the usual way.
After power-off the keyguard deactivates itself.
KEYGUARD
To Next Page
Loading...
Need help?
General
Weight and Dimensions
