19
1) Press ALPHA.
2) Press RCL and v or V to
display the contents of the first
memory location, then press
v or V to display the next or
previous, and so on. In alpha
mode, the memories are arranged
in alphabetical order by the
first character.
3) If you want to check the phone
number stored against a name,
press ALPHA. Press it again, then
use v or V to carry on scanning
through the names.
4) When you find the name you
want, make the call by pressing SEND.
If you want to ‘speed search’
names, key in the first letter of the
name you are looking for and then
press RCL. The first name
beginning with this letter will appear
on the display.
To scan forward press v, to scan
backwards press V (within 15 seconds).
In addition to the 48 permanent memory locations, the
phone has one short term memory location to temporarily
store numbers keyed in during a call. The scratchpad
location is cleared when the phone is switched off.
Note: You may wish to turn the ‘Keypad Tones’ off,
(Menu 5), to store numbers during your call.
1) Key in the area code and phone number.
2) Press STO # #.
3) The phone will store the number in the scratchpad
memory location.
THE SCRATCHPAD MEMORY
To Next Page
Loading...
Need help?
General
Weight and Dimensions
