15
Your phone has 48 standard memory locations which allow
you to store phone numbers of up to 32 digits or names of up
to 16 letters together with phone numbers of up to 32 digits.
Only numbers or letters can be displayed at any one time.
To switch between them press ALPHA.
In addition, memory location 0 stores the last number dialed
and memory location 49 stores your phone’s own number.
1) Key in the area code and phone number.
2) Press ALPHA.
3) Key in the name (see
‘Keying in Names’).
4) Press STO.
5) The display will read ‘STORE’.
6) If you want the information stored in the first available
memory location shown on the upper right corner of the
display, simply press STO.
Otherwise, key in a memory location
number and press STO.
7) The message STORED will
be shown on the display, con-
firming that the information has
been stored in the memory location
specified in the upper right corner
of the display.
8) Note, if all the memory locations
are used, the display will read
‘NO SPACE’.
9) If you try to store information in
a memory location that is already
used, the phone will display the
memory location number and the
REPLACE CONTENT? message.
If you want to replace the existing
information, press STO (within 8
seconds).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
