➋
Key in the name you stored with the phone number that
you want to dial. You don’t need to key in the whole
name if there is only one name beginning with the same
letter(s).
For more information on keying in a name, see Keying in
a Name in chapter Memory Operations.
➌
Press .
If the name keyed in could not be found, the message
NAME NOT FOUND
will appear.
International Calls
If you insert a + character in front of the country code, you
don’t need to know the international access code of the
country where you are using the phone.
➊
Press the
✱
key twice quickly.
A + character will appear.
➋
Key in the country code, area code and phone number
of the person you wish to call.
➌
Press to call the number.
Making a call while you have a call in progress
You may have up to two calls in progress at the same time
(network service). Of these two calls, one will be active (the
person you are calling can hear you) and the other on hold
(the person cannot hear you).
One of the calls may be a conference call where up to five
persons may participate at a time.
For subscription to this function, contact your network
operator.
➊
During a call, key in or recall from memory the other
phone number that you want to call.
EN
EN
NHE-4NX (2110 model II)
9350586 (en) ISSUE 5
9350637 (issue 3)
NHK-4NX (2140)
9350693 (en)
ISSUE 3
NHE-4NY (2118)
9350593 (en)
ISSUE 5
NHK-4NY (2148)
9350696 (en)
ISSUE 3
General Functions
29
To Next Page
Loading...
Need help?
General
