CLEAR COUNTERS
Resets all cost counters.
➌
If you selected
CLEAR COUNTERS
, press the
OK
selec-
tion key. Next, key in the PIN2 code and press the
OK
selection key.
The message
COUNTERS CLEARED
will show up to
indicate that cost counters were reset.
Note:
There is no way to undo the reset operation.
CALL COSTS LIMIT (Menu 6 3)
This function allows you to limit the total costs of outgoing
calls to a specified number of charging units or units of the
currency that you have set in Menu 6 4.
Emergency calls to the number 112 can be made even if
there are no charging units left.
➊
Press
Menu
6 3
to enter this function.
➋
Key in the PIN2 code and press the
OK
selection key.
➌
Press the or key to select
Set
(turn limit on) or
None
(turn limit off) and press the
OK
selection key.
➍
If you selected
Set
, key in the cost limit in charging units
or units of the currency. Pressing the
#
or
✱
key will insert
a decimal point.
➎
Press the
OK
selection key.
If you activated the cost limit, the quantity of remaining charg-
ing or currency units will be continuously shown on the dis-
play when in idle mode. When all units have been used, no
calls can be made except for emergency calls to the num-
ber 112.
Menu Functions
83
To Next Page
Loading...
Need help?
General
