FAX OR DATA CALL (Menu 11)
Your phone supports the sending and receiving of data via
an optional data adapter which connects to the base of your
phone.
If there is no data adapter connected to the phone when you
enter this menu, the message
CONNECT TERMINAL
will
appear. Check that the data adapter is properly set up.
The phone will automatically recognise the type of the con-
nected terminal.
To create a data or fax connection:
➊
Press
Menu
11
to enter this function.
➋
When prompted to do so, key in the phone number of
the receiving end and press the
OK
selection key.
➌
After the transmission, end the call by pressing .
Or:
➊
In idle mode, key in the phone number.
➋
Press
Menu
11
to call the number.
➌
After the transmission, end the call by pressing .
During a transmission, the message
DATA CALL
or
FAX
CALL
and the
D
indicator are displayed.
For more information, refer to any documentation or instruc-
tions which may be supplied with your data adapter, data
application or fax application
Menu Functions
94
To Next Page
Loading...
Need help?
General
