RINGING OPTIONS (Menu 12)
You can select the indication mode for incoming calls from
the following options:
RING AND VIBRATE
The phone will sound a ringing tone, flash its lights and
vibrate.
The lights will not flash when the Lights function in Menu
4 01 is set to
Off
.
Note:
The vibrating option is available only with a special
battery. Consult with your dealer.
RING
The phone will sound a ringing tone and flash its lights.
BEEP
The phone will sound a short beep and flash its lights.
VIBRATE
The phone will vibrate and flash its lights.
Note:
This option takes effect only with a special battery.
SILENT SERVICE
The phone will flash its lights only. No tones will be heard,
including keypad, warning and countdown timer tones.
➊
Press
Menu
12
to enter this function.
➋
Press or to select the option that you want.
➌
Press the
OK
selection key.
When
BEEP, VIBRATE
or
SILENT SERVICE
is selected, the
text
SILENT
will be shown on the display in idle mode.
Note:
When the phone is connected to a handsfree car kit,
you can set the indication mode separately for this acces-
sory. With this accessory,
RING AND VIBRATE
and
VIBRATE
are not available.
Menu Functions
95
To Next Page
Loading...
Need help?
General
