➌
Press the 
OK
 selection key.
Note:
 If you selected 
CANCEL ALL BARRINGS
, you can
ignore the steps which follow.
➍
Press    or   to move the pointer to 
Activate
 (set the 
selected barring mode on), 
Cancel
 (set the selected bar-
ring mode off) or 
Status
 (show call types which are or can
be barred). 
➎
Press the 
OK
 selection key.
At this stage the phone calls the network operator and
requests that the desired operation be performed. After
receiving a response from the network, the phone will end
the call automatically.
➏
If you selected 
Activate
 or 
Cancel
, key in the barring pass-
word and press the 
OK
 selection key.
If you selected 
Status
 in step 4, the phone will list the call
types (e.g. voice calls, data calls, fax calls) to which call
barring applies or can be applied. Press    or   to scroll
through the list.
Note:
 Instead of using this menu function, you may set on
and off different barring modes by using manual command
strings.
In idle mode, key in a command string and press the 
key to transmit it to the network. For required command
strings, contact your network operator.
VIEW FIXED DIAL LIST (Menu 5 4)
Within this submenu you can review the contents of the fixed
dialling list that you created within Menu 5 5.
➊
Press 
Menu
 5 4
 to enter this function.
➋
Press the   or   to scroll the names included in the list.
Press the 
ABC
 key to review the associated phone num-
bers.
Menu Functions
76